Hello you lovely people! Lil’ disclaimer- I got a tad carried away with the intro to this post. So if you would like to forgo my waffling and skip to the good stuff, you just scroll on down! 🙂
I don’t know about you guys, but I am just not feeling quite as festive as I’d like to be at this time of year. There’s something about being at university that really zaps the fun out of the Christmas season, or any season for that matter. All I want to be doing is shopping for Christmas decorations with my family, enjoying mulled wine at the Manchester Christmas markets with Jason, and making a start on my Christmas projects; but instead I’m overwhelmed with deadlines, coursework and the responsibilities of being a fully functioning adult living on my own.
It’s not just a lack of free time that’s the issue though, when you live away from home it kind of feels like you’re missing out on…well, life. At least for me. Not having my car up here with me makes it difficult to get out and about, and I really miss the mundane things like Sunday afternoon trips to a garden centre with my parents.
But, with all that said and done, I am really trying to get in the Christmas spirit! I mean, really trying. My flatmates have been subjected to me blasting Christmas songs from my room, and I’m trying my damn well hardest to start a few Christmas craft projects!
Which brings us to today’s post: my DIY conker wreath! Despite it being nearly December, this wreath would’ve been a super cute edition to your decor throughout the Autumn season (and it would’ve been, if I’d got my act together and made it sooner!). But this wreath is also a perfect way of adding some Christmas cheer to your home, which is EXACTLY what I am in need of right now! Plus, this was super cheap to make! I actually had all of the stuff in for this already, so it was actually free for me! And even if you don’t have some scrap fabric lying around, you would have more than enough if you purchased a quarter of a metre! 🙂
I collected most of the conkers for this wreath back when Jason and I were holidaying in France, in late September. I have always had magpie-like tendencies when it comes to things like conkers and acorns; I remember rummaging around for them back when I was a kid- I was a pretty weird kid. Collecting conkers is something I will always associate with my childhood and Autumn, but even though I am now twenty, I still enjoy filling my pockets with shiny brown chestnuts! Skip forward a week of conker collecting in France, and I had about thirty of the beauties, and no idea of how to use them.
Enter my DIY conker wreath:
You will need:
- Strong cardboard. I used the cardboard from a shoe box.
- Hessian/ Burlap.
- Assorted fabric scraps
- A glue gun
- Scissors/ Craft knife
- Draw out a heart shape on your cardboard to whatever size you want your wreath to be. Mine was about 10″ high and 10″ wide at its widest point, but this is totally up to you. Take into consideration how much fabric you have to hand and how many conkers. You could also print off a template for this if you’re not too confident in your drawing ability! 🙂
- Draw a smaller heart shape inside your heart so that you have your desired wreath shape. Cut around your wreath using scissors or a craft knife. Cut out the centre of your wreath.
- Place a blob of glue at the top of your wreath, on the front and back of the cardboard, and attach a loop of ribbon here so that you can hang your wreath.
- Now that you have your desired wreath shape, begin to cut out strips of hessian/burlap. You will be wrapping these strips around your wreath, so ensure that they are at least twice as wide as the wreath itself (enough to go over the front and the back of the cardboard).
- Using your glue gun, glue a strip to your wreath by folding it in half and placing the fold on the inner edge of your wreath, so that one half of the strip is glued to top of the cardboard and the other half is glued to the back. You want it so the ends of the strip are on the outer edge of your wreath.
- Repeat this with as many strips as necessary, until all of the cardboard is covered. You should have some nice texture around the outer edge of your wreath thanks to the raw edges of the hessian.
- Now you can start to glue gun your conkers onto the wreath! This does require quite a lot of glue, but I love the finished effect. I must say though, this isn’t a foolproof method. Some of the conkers can become a bit loose when the glue dries. I’d recommend ensuring that they are securely stuck down with lots of glue, and of course being careful with your wreath when dry.
- Now that you have added your conkers, cut out some strips of assorted fabric. You want these strips to be about 3″ long.
- With one strip, twist it in the centre so that you have a little bow shape. Pop a blob of hot glue in the centre, and press it onto you wreath (use a pen or similar to press the fabric down, you don’t want to burn yourself!). This is how I added the texture to my wreath, as twisting the fabric strips and attaching them in this way gives a charming 3D effect.
- Repeat this with as many fabric strips as you like, until you are satisfied with the overall appearance of your wreath.
Ta da! Easy as that.
There you have it guys! Thanks for reading, I hope you enjoyed this post! What’ve you been making in anticipation for Christmas? Let me know in the comments!
Best wishes to you all, filled with lots of festive cheer!