Christmas stocking DIY

P1230104

Hello! One week today until Christmas; are we all excited?! I’m back home from university and fully getting into the festive swing of things. Following a wonderful (but cold!) Friday night spent with Jason at the Manchester Christmas markets (featuring food, mulled wine, and more food), I’ve spent the weekend watching Christmas movies with the family.

I like to think that I am an incredibly organised person. I always have my coursework ready to hand in the day before it’s due, and I plan my meals for the week way in advance- but somehow this Christmas has completely sneaked up on me and I am feeling totally unprepared! I’ve still got a shed load of Christmas making and baking that I want to do- that was today’s job!- and I haven’t even finished my Christmas shopping yet! I still need to make some Christmas cards too. In short, I’m exhausted. But thoroughly enjoying myself.

Today I bring you one of the few Christmas projects that I made well in advance of December! I actually made this Christmas stocking back in September, before I’d even started my second year of uni! Now, one term in and one week away from the special day itself, I finally got around to getting it up on the blog for you all to see!

I love this stocking! It took very little time to make and I think it turned out looking great. It was a pretty easy sewing project, great for beginners as you get to practise two different types of machine stitching.

For this project you will need:

  • Approx 1/2m of fabric for the body of the stocking. (I decided to use a different fabric for the front and the back of my stocking because I couldn’t decide which I preferred- haha!).
  • A contrasting white fabric for the top of the stocking
  • A contrasting Christmas fabric for your initial
  • Matching thread
  • A small piece of ribbon
  • Fabric scissors
  • A sewing machine
  • Greaseproof paper or similar to create a template
  • Chalk
  • Pins

Instructions:

  1. Begin by drawing and cutting out your template. I drew my stocking shape by hand, but if you’re not too confident in your drawing ability you can find plenty of stocking templates and sewing patterns online! If you are drawing yours by hand like I did, remember to include enough fabric for a seam allowance (that is, the fabric that will be inside of the seam once you have sewn the front and back of your stocking together).P1230071
  2. Place your template on the right side of the fabric that you want the main body of your stocking to be made out of. Draw around it using some chalk, before carefully cutting the shape of the front of your stocking out using the fabric scissors. Flip your fabric over so that the right side is now facing away from you, and draw around it once more, before cutting it out to create the back of your stocking. You will now have the front and back of your stocking.
  3. Now create a template for your initial. Again, I drew my M freehand, but you can find plenty of lettering that you can trace online. Place this template on top of the right side of your chosen fabric (that is, with the patterned side of your fabric facing towards you), and draw around it using your chalk before cutting it out.P1230074
  4. Place your initial on the front of your stocking. Once you are happy with the placing, pin it into place. Nows the fun part! Set your sewing machine to a zigzag stitch. You want the zigzag stitch that sews the ‘tightest’ zigzags, so its basically sewing tiny horizontal lines back and forth. This will create the thick, coloured line of thread that you see around my M. Now, carefully begin to sew around your initial using the zigzag stitch. This was actually easier than I had thought it would be, and I didn’t have any issues with the fabric bunching up. Ensure your tension is right, take your time and use lots of pins!P1230078
  5. Once you have sewn all around your initial, you can sew the front and back of your stocking together! Place the front and back together with the right sides of the fabric facing each other (so the two sides of the fabric that you wish to show when the stocking is complete should be facing each other; your initial will be on one of these). Pin around the edge and use a straight machine stitch now to sew all around the edge of your stocking, leaving the top open- you need somewhere for Santa to leave your presents! Once you have done so, trim a couple of small triangles along the seam where the stocking curves (for example, on the toe and heel). These little triangles will prevent the fabric from gathering at the seam when the stocking is turned the right way out.P1230080
  6. Turn your stocking the right way out. Now all that’s left to do is add the cuff! Use a tape measure to measure the circumference of the top of your stocking. Your cuff will have to be the same size as this opening. Add 1″ to whatever the circumference of the stocking measured (this will be for your seam allowance), and now cut a rectangle from your white fabric that is approximately this long and 10″ wide.
  7. Fold the rectangle of fabric in half lengthways (with right sides of fabric facing outwards) to produce a rectangle that is half as wide. Press with an iron to create a nice, sharp fold. Now fold the rectangle in half widthways. Pin along this open end, 1/2″ away from the raw edge. Sew along this line.
  8. Place the cuff inside the top of your stocking, so the raw edge of the cuff is along the raw edge of the stocking (ensure the seam of the cuff is visible at this stage). Create a small loop of ribbon and place it with loop pointing downwards, in between the layer of the stocking and the cuff. Pin around the top of the stocking, pinning the stocking to the cuff and the ribbon into place. If you are unsure around the placing of everything at this stage, try turning your cuff out so that it is on the outside of your stocking. You should have a nice clean seam on the top of your stocking where it meets the cuff, and the seam of your cuff should now be inside.P1230087
  9. Once you are sure you have pinned everything correctly, machine stitch along the top of your stocking where you have pinned. You can now turn the cuff out, so that it is on the outside of your stocking and all your rough edges are hidden inside!
  10. Ta da. A stocking so good, Santa would be proud.

P1230096

I hope you enjoyed this sewing project today guys, its been a while since I did a sewing DIY on the blog. Would you be interested in seeing some more? Let me know!

That’s all from me today, I hope you’re all having a wonderful day/evening, wherever you may be in the world!

Best wishes,

Maddie x

6 thoughts on “Christmas stocking DIY

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s