DIY Halloween candles!

Candles.png

Hi guys! Now that it’s October it feels only right that I should post my first Halloween related blog post! Today’s post is a great spooky DIY for all you Halloween fanatics out there.

Say hello to my Halloween candles. My initial intent when making these candles was just to make pumpkins, but the striped Candycorn-esque candle was actually a great way of using up the excess wax that I had melted.

I love how these candles turned out! I hadn’t tried candle making in a good few years, it’s probably five years since I last tried my hand at the craft, but I loved the process of making these beauties! It was fun and really easy, and produced great results! Let’s be honest, making your own candles sounds a lot more sophisticated than it actually is… and that makes it a winner in my book! Anything that will impress my family and friends while requiring little effort on my part gets a big thumbs up from me.

If you’ve never tried candle making before, you don’t really require too much fancy equipment to get started; although I would definitely recommend purchasing a candle making kit to help get you up and running. This is usually a cheaper option than purchasing the equipment individually, and all kits come with detailed instructions and safety precautions. My first candle making kit was this Creative Candle Making kit from House of Crafts, which provided me with the moulds used in this project. I found it to be really good value for money, as you are given enough supplies to make up to 20 different fragranced and coloured candles! Plus it makes a great Christmas present for craft lovers.

P1230797

So let’s get started! 

You will need: 

  • Paraffin wax pellets, approx 500g. You can purchase 1kg of paraffin wax pellets here
  • Wick. I found a really cool article explaining how to make your own candle wick here! Great if you want to save some money.
  • A wick rod. A pencil or lolly pop stick would also work.
  • Red and yellow coloured candle dyes. I used these
  • A fragrance of your choice.
  • A mould sealer. This is just blutac or plasticine.
  • A round candle mould and a pillar mould. This is one of the main reasons I so strongly recommend purchasing a candle making kit, as you will be provided with several moulds to get you started. If however you do wish to purchase your own, I use these moulds for my candles.
  • One large and one smaller saucepan that fits comfortably inside the larger.

P1230799

Instructions:

The first thing to do when candle making is to ensure you’re working within close proximity to your cooker. Cover your work top in newspaper in order to protect it from any hot wax that may drip onto it. 

Safety tips:

  • Ensure your water level in your large saucepan is always at least as high as the wax pellets in the small saucepan. Add more water as you melt your wax if you need to.
  • Should you wax catch fire, smother with a damp tea towel. Do not add water.
  1. Prepare your moulds. You need to use a spherical mould for the pumpkin candle and a pillar mould for the Candycorn candle. Pass your wick through the small hole in the top of your mould and out the bottom, leaving around 4cm of wick poking out the top of your candle mould and 12cm of wick at the bottom of the mould to tie around your wick rod. Your wick rod is just something that you can tie your wick to.
  2. With your candle mould upside down (so you will have a large opening facing upwards where you can pour your wax in), balance your wick rod so that it is lying across the candle mould, there will usually be two little grooves on your mould here to help you do this. Tie the end of your wick around the wick rod. Pull your wick tight by the 4cm piece of wick sticking out the top of your candle and seal this end of the wick with a piece of blutac or plasticine, this is just to prevent hot wax dripping out of the mould.
  3. Your mould is now ready for your wax.
  4. Fill your large saucepan about three quarters of the way full with water. Place your small saucepan inside your large saucepan, so that it sits in the water. Begin by making the wax for one of your pumpkin candles. If you want your final pillar candle to look more Candycorn-like than mine, make your yellowy pumpkin first. Place your wax pellets in the small saucepan, you will require around 200g of wax for the mould I used, but don’t worry about melting too much. You will be pouring the excess into your pillar candle anyway.
  5. Heat your wax on a medium heat, stirring occasionally as it melts. Add your dye. You will only require a tiny amount of dye to colour this amount of wax, your dye packaging should give you some sort of guidelines for how much you need.
  6. Once your wax has melted, take it off the heat immediately and add your fragrance. A few drops of this will be sufficient, I’d say 3-5.
  7. Pour your wax into the mould and leave to cool. When you have filled your spherical mould, pour the excess wax into your pillar mould. Place your spherical mould in the fridge overnight to aid you with removing your candle rom the mould.
  8. After leaving your candle overnight in the fridge, you may remove it from the mould. To remove your spherical candle, untie your wick rod and run a blunt knife around the centre join of your mould. You should be able to ease the bottom off, followed by the top.
  9. Now make your orangey/red pumpkin using the same process. Pour your excess wax into the pillar candle on top of your yellow layer.
  10. Now make a white batch of wax by adding no dye this time. You will only need about 50g of wax. Pour this on top of the red layer of the pillar candle before placing this candle in the fridge overnight too.
  11. To remove the pillar candle, remove the wick rod and mould sealer before rapping the mould on a hard work surface firmly. Repeat this until the candle falls out.P1230793.jpg
  12. If you wish to make your candles look extra smooth and shiny like mine, you can carry out a process called glazing. Holding the wick of you candle before you cut it down to size, dip your candle in hot water from the kettle. Once the candle has cooled, polish the candle with an old pair of tights to make it extra shiny!
  13. Once you have done this, add your pumpkin’s face! I used a black permanent marker pen for this, though black acrylic paint would also work.

Ta da! There you have it, your homemade pumpkin candles. I know this post seems incredibly lengthy, but the candle making process really is simple, and great fun. Once you have mastered your basic candle making skills you can try all sorts of new colour and fragrance combinations, and maybe even try adding things like glitter into your hot wax to give your candle some extra sparkle.

That’s all from me today, I hope you’re all enjoying October and getting in the Autumnal mood! If you have any trouble with making your candles or would like to know anything more about the process, please let me know in the comments!

What have you been making for Halloween? Tell me all about it!

Best wishes to you all,

Maddie x

Note: This post contains affiliate links, meaning I will earn small commission if you choose to purchase certain items that I have linked. All items that have been linked in this post have been tried and tested by me and are my favourites, though not all have been bought from the same suppliers! 🙂 

 

 

23 thoughts on “DIY Halloween candles!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s