Hi guys! Today’s post is my DIY bunting. I LOVE bunting. Seriously, love the stuff. I’ve got it in my bedroom, the kitchen, the garden, on the wall, in the window… you get the idea.
I think bunting is a great, cheap way of adding character to any space. I love the vintage look and feel of bunting, and it’s ability to transform a room. For me, it creates a festive and homely atmosphere- plus its renter friendly! I use blu tac when I’m at uni to stick bunting up on my walls to help make my room feel like home.
Working in a fabric shop, I often get asked for suggestions on easy sewing projects for beginners, and I always respond with bunting. It’s a really simple but rewarding DIY, perfect for people who are just getting to grips with a sewing machine.
If you fancy giving it a go yourself, find my step by step instructions below!
You will need (for a 2m length of bunting) :
- Assorted fabric. The bunting featured in this post was made using five different fabrics; use what you have in or purchase quarter of a metre lengths of each. This will give you more than enough fabric to produce two metres of bunting.
- 2.5m of Bias Binding or ribbon.
- A sewing machine.
- Matching thread.
- Fabric Scissors.
- Greaseproof paper, card or similar to cut a template out of.
I purchase all of my fabric from The Buttonhole, my place of work. They offer a great selection and also international delivery on all of their fabrics. All fabric featured in this post and my other DIYs is sourced from The Buttonhole.
What to do:
- Cut out a template for your bunting. An equilateral triangle of approximately 6″ by 10″ will do the job, or scale to your own requirements depending on what you want your final bunting to look like.
- Pin your template to each of your fabrics in turn and cut around. To make a 2m stretch of bunting you will require around ten flags, this means you will need to cut twenty triangles. Note: Two triangles makes ONE bunting flag. You will see why in the next step.
- Place two matching triangles right sides together, that is, with the correct sides of the fabric facing each other. Pin down the two long edges of the triangle before machine stitching down these edges, leaving the top open. Tip: By pinning perpendicular to the edge of the fabric as shown below, you can sew over you pins with your machine without breaking the needle.
- Turn your flag the correct way around and press with an iron. Repeat this method until you have created all your flags.
- Fold the two raw edges at the top of you flag inside the flag to create a neat edge, press and machine stitch into place.
- You are now ready to attach your ribbon or bias binding. If you wish to use bias binding and would like to know how to do this, please refer to this blog post where I explain in detail how to attach bias binding to your projects. If using ribbon, place the top of your flag just behind the ribbon and machine stitch into place.
- Repeat this, spacing out your flags evenly along the length of your bunting until all have been sewed on!
That’s it! Congratulations on your new bunting! I hope you guys enjoyed this post and maybe it inspired you to get crafty! Have you got any renter friendly DIY decor ideas? Let me know! It’s always great to discover new ways of decorating my student halls.
Best wishes to you all!