Hey guys! It’s finally Friday! I’m afraid that due to a very hectic working day today I haven’t had chance to put together my usual projects for the weekend post, I have however got a small post for all you sewing enthusiasts out there! If sewing’s not really your thing, why not check out some of my previous posts for some weekend inspiration?
So you may have seen my recent post about my battle with my gran’s blanket. If you didn’t, why haven’t you been keeping up to date with my blog?! Jokes, thanks for being here now! But if you did you will know all about my struggle of bias binding the edges of said blanket.
After publishing that post it occurred to me that some of my readers wouldn’t know what bias binding was, and also some of you would probably like to know how to use it! Hence today’s post: How I attach bias binding. I called this post ‘How I attach bias binding’ rather than ‘How to attach bias binding’ as I’ve never actually been shown how other people do this. I’ve just sort of tried a few different techniques over the years and eventually found one that works for me, which is what I’ll be sharing with you today.
So what is bias binding?
Bias binding is something used for covering up raw edges when sewing garments or things like quilts. Its basically a strip of fabric with the two edges folded in and is bought on a roll, kind of like a cotton ribbon with the two edges folded over.
How do you attach it?
Well I can’t speak for everyone else, but this is how I attach bias binding to my projects.
- Fold the bias in half lengthways and press it with an iron. When you have done this you will have three folds in your binding, the two it is purchased with and then the one you have just added.
- Pin your bias along one of the outer folds to the raw edge of your fabric as shown below. I was adding the bias binding to a blanket that had started to fray at the edges, hence the mess poking out from behind my bias! Not to worry, all this will be encompassed by the bias binding once we have attached it 🙂
- Machine stitch along the fold where you have pinned.
- Fold the bias over the raw edge of your fabric, encompassing the edge. You want the centre fold that you have pressed into the bias to be on the edge of the fabric. Pin this into place as shown.
- You can see now that you have two neat edges on either side of your bias binding, exactly what we wanted! Machine stitch close to the edge.
There you have it! My way of applying bias binding. I’ve used this technique to edge a quilt and also to make bunting; two projects that I will be sharing with you in future blog posts!
I hope this may have been of some help for those of you wanting to try out something new with your sewing! Leave any questions or comments below!
Best wishes to you all,